PEATY'S RIM JOB TUBELESS TAPE 35MM

Designed by pro riders, mechanics and scientists, Peaty’s Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.

Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.

35MM

Fitting instructions:

• 01) Remove tyre and any old rim tape
• 02) Clean and degrease rim thoroughly
• 03) Ensure rim is completely dry before application
• 04) Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
• 05) Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
• 06) Use a small spike to pierce the tape in the centre of the valve hole
• 07) Remove dust cap and Push valve through the valve hole
• 08) Apply lock ring tightly by hand, ensuring there are no air gaps
• 09) Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre
• 10) Ride!